A buyer considering the AY-ST-V2.0 should be able to describe a land journey for which the high back and adjustable leg rest are relevant. A beach club might need to reach a shaded viewing area beyond its boardwalk. Find out who will assist the visitor, whether the visitor’s individual needs can be assessed, and whether the route and storage area can accommodate the configured chair before comparing prices.
Compare the seat, the footprint and the packed unit separately
The AY-ST-V2.0 English manual identifies a four-wheel beach wheelchair with a high backrest, a five-position leg rest and a folding carbon steel frame. It gives a seat width of 45 cm, seat depth of 43 cm, maximum load of 100 kg and assembled dimensions of 120 × 110 × 122 cm. The supplier lists the carton at 80 × 25 × 90 cm, with a gross weight of 22.5 kg. The unpacked product weighs 19.5 kg. Match these references to the revision actually offered. AY-ST-V2.0 English manual, pages 2–3
The seat figures belong with the person responsible for individual suitability. The overall dimensions belong on the route plan. The carton dimensions belong with freight and goods receiving. None gives a turning radius or the occupied clearance when the backrest and leg support are adjusted. Ask for the dimensions in the positions your service expects to use and verify the unresolved spaces with the actual chair.
Set the purchasing conditions that affect daily service
| Purchase question | Specific evidence to request |
|---|---|
| Will the unit serve the intended guest arrangements? | Model and revision, seating and adjustment documentation, and a route for individual assessment where needed. Specify the intended land service. |
| Can the chair get from storage to the destination? | Assembled drawing, clear gate and landing measurements, a way to verify turns, and space for the attendant on the return. |
| What must the site maintain? | Identification of the applicable front and rear inflatable PU wheels, fittings and adjustment components. Request parts references, current instructions and supply terms. |
| What is the delivered price? | Chair and included components, freight, unloading point, any separate tools or spares, warranty terms and who pays return freight for agreed remedies. |
For example, a quoted chair with an overall width of 110 cm cannot pass straight through a fixed 105 cm clear opening as assembled. Measuring a wider gate across the courtyard only helps if the chair can reach that gate on an authorized path and return during service hours. The buyer can request a trial at that entrance or choose a different solution before placing the order. A foldable frame addresses a different question about empty equipment storage or transport.
Resolve the doubtful part of the offer before award
Mark each offer as conforming, differing or awaiting evidence against the same requirements. Ask the bidder to identify any substituted wheel, support or fitting. If two bids describe a “high-back beach wheelchair,” compare their actual supplied assemblies and replacement part references. The chair is being considered here for assisted travel on land. A buyer planning flotation needs a separately documented model and service.
Attach the agreed configuration and site route decision to the order. Identify which document, measurement or trial result closed each open question. At delivery, give the receiver a copy of that record and the model-specific receiving inspection. That allows the receiver to hold a substitution without reopening the entire purchasing decision.
