
Beach Balloon Wheels Project: Sand Wheels Fitted to Carts, Trolleys and Beach Wheelchairs
We match the wheel size, tire material and hub bore to your axle, so the equipment you already build or sell rolls over soft sand instead of sinking into it.
What a Beach Balloon Wheels Project Covers
Most buyers come to us with equipment that already works on pavement and stops in sand. The project is to change that without redesigning the frame.
One wheel drawing, checked against your axle, turns a standard cart into a beach cart your customers can pull across dry sand with one hand.
Every wheel in this project comes from our own beach balloon wheel range, the same wheels we fit to our beach wheelchairs. You deal with the factory that moulds the tire, so sizes, bores and colours are decided in one conversation. See how the same approach worked on our other beach equipment projects.
- Project type
- Beach balloon wheels supplied as a retrofit kit or as original equipment for a new product line
- Equipment
- Folding beach carts, cargo and fishing carts, kayak trolleys, beach wheelchairs and beach walkers
- Wheel range
- 7.5″, 8″, 9″, 12″ and 16″ low-pressure balloon tires
- Tire material
- PU for daily commercial use, PVC for seasonal and price-led lines
- Axle interface
- Bores from 8.5 to 30.5 mm, press-in bushings, or a 20 / 25 mm bearing hub on the 16″ PU wheel
- Sample
- A single wheel set, shipped before you commit to volume
- Custom order
- 30–45 days from confirmed drawing to finished goods
- Factory
- Foshan, China. Building beach mobility equipment since 2015
Have equipment that needs sand wheels?
Why Standard Cart Wheels Fail on Soft Sand
Sand punishes small, hard wheels. These are the three faults we are asked to fix most often on beach cargo carts and trolleys.
Narrow wheels cut into sand
A hard 5 cm wheel puts the whole load on a thin line and digs in. A balloon tire up to 21 cm wide spreads it, so a loaded cart stays on the surface.
Hard tires shake the load
Solid wheels pass every ripple into the frame. A tire running at 2–5 PSI flattens over them, so coolers, rods and passengers ride quietly.
A loose bore wears the axle
A hub that almost fits wobbles and scores the axle. A bore or bushing matched to the millimetre keeps the wheel square and your warranty claims low.
Tell us where your current wheels get stuck.
Which Balloon Wheel Size Fits Your Equipment?
The four sizes below are drawn to the same scale. A larger wheel rolls over softer sand; a smaller one keeps the product compact and the price down.

7.5″–8″PU / PVC
- Diameter
- 190–203 mm
- Tire width
- 100–110 mm
- Load per wheel
- 35 kg
Small enough for hand trolleys and light carts, so short-axle frames gain sand flotation without growing wider.

9″PU / PVC
- Diameter
- 210–232 mm
- Tire width
- 110–132 mm
- Load per wheel
- 45–60 kg
The usual front wheel on walkers and wheelchairs. It steers lightly and still carries 60 kg in PU.

12″PU / PVC
- Diameter
- 300–315 mm
- Tire width
- 140–162 mm
- Load per wheel
- 60–80 kg
The size most cart makers choose. In PU, a 162 mm tire carries 80 kg per wheel, enough for a fully loaded family cart.

16″PU / PVC
- Diameter
- 400 mm
- Tire width
- 200–210 mm
- Load per wheel
- 80 kg
The widest footprint we make. It keeps wheelchairs and heavy cargo carts moving through deep, dry sand.
Need the full dimension table for every size?
PU or PVC Balloon Wheels: Which Suits the Project?
Both tires share the same wide, low-pressure shape. The material decides how much load the wheel takes and how many seasons it works.
PU balloon wheel
PVC balloon wheel
Not sure which material fits your price point?
How We Match the Balloon Wheel to Your Axle
Four measurements decide whether a wheel fits. Send them once and we return a wheel drawing for approval.
1234-
Hub bore
The standard bore is 8.5 mm. Press-in bushings open it up to 25.5 mm, so the wheel slides onto your existing axle with no machining.
-
Tire width
A 12″ PU tire is 162 mm wide. We check it against your usable axle length, so the wheel seats fully and the retaining clip still fits.
-
Brass valve
The valve takes a simple hand pump. Your customer tops the tire up to 3–5 PSI on the beach, with no compressor needed.
-
Inflated diameter
The 12″ wheel measures 315 mm inflated and varies 1–2 cm with pressure and heat. We confirm frame clearance on the drawing before you order.
Measure the axle diameter and usable length, then send both.
Equipment We Fit with Beach Balloon Wheels
The same wheels go on our own products and on our customers’ frames. Kayak trolleys, hand trucks and utility wagons take them too.
Folding beach carts
Two balloon wheels on the rear axle let a folded cart open and roll straight onto the sand.
Cargo and fishing carts
Four wide tires share a heavy load of coolers and rods, so one person pulls it to the waterline.
Beach wheelchairs
Large rear and smaller front balloon wheels keep the chair level, so the user stays comfortable on soft sand.
Beach walkers
Balloon wheels stop a rollator digging in, so seniors walk the beach path with steady support.
Building something that is not on this list?
From Car Park to Waterline: How the Wheel Is Set Up
A beach trip crosses five surfaces. We look at each one when we recommend a size and pressure for your product.
| Surface | What happens there | How we set the wheel |
|---|---|---|
| Pavement and car parkHard, flat | A soft tire drags slightly on hard ground. | Inflate towards the top of the working range. The wheel rolls freely, so the walk from the car feels light. |
| Boardwalk and access matJoints and gaps | Narrow wheels catch in board gaps and mat seams. | The wide tire bridges gaps and crosses an accessible beach mat smoothly, so nothing jolts at each joint. |
| Firm wet sandNear the waterline | Most wheels cope here, but loads still leave ruts. | A 9″ or 12″ wheel is enough. It keeps the product compact while the cart tracks straight. |
| Soft dry sandAbove the tide line | This is where narrow wheels sink and carts stop. | Choose 12″ or 16″ and run the lower end of the pressure range. The footprint widens, so the load floats. |
| Water edge and rinseSalt water | Salt and grit attack bearings and metal hubs. | Plastic hubs and a brass valve shrug off salt water. A fresh-water rinse after use keeps the wheel turning for seasons. |
Tell us the route your customers take to the water.
The Numbers Buyers Check First
Three figures usually settle whether a balloon wheel suits the product.
Load on one 12″ PU wheel
A two-wheel cart carries 160 kg on its balloon axle, so a full day of beach gear moves in one trip.
Largest standard bore
Bores start at 8.5 mm, so both light trolleys and heavy-duty cart axles fit without a custom hub.
Custom order lead time
Sizes, colours and bores are fixed on one drawing, so your launch date holds from the first order.
Want these figures for your own wheel size?
From Wheel Sample to Bulk Order in Five Steps
The route is short because the tire, hub and assembly sit under one roof. Read more on why buyers choose Ary.
Send axle data
Share the axle diameter, usable length and a photo. We see the interface before quoting, so the first price is the right one.
Approve the drawing
We return a wheel drawing with size, bore and bushing. You approve it once, so nothing changes later.
Test a sample
A single wheel set ships for a fit and sand test. You confirm it on your own frame before paying for volume.
Production
Tires are moulded, air-tested and assembled in 30–45 days. One factory does it all, so the schedule holds.
Pack and ship
Wheels leave inflated or vacuum-packed to suit your freight. You receive cartons ready for your line or warehouse.
Ready for step one?
Custom Balloon Wheels for Your Product Line
A wheel in your brand colour makes the product yours. These are the choices open on an OEM order with our factory.
Standard silver grey PU wheels
Dark grey PU wheel
Yellow wheels on a customer beach cart
Orange wheels made for an OEM order
Any colour matched to your sample or colour codeTire colour
Click a colour to see it on the wheel. Silver grey ships as standard; any other colour is matched to your sample and starts at 500 pcs for 12″ and 16″ wheels and 1,000 pcs for smaller sizes, so your cart stands out on the shelf.
Hub and bore
Pick a plain bore, a bushing set or a 20 / 25 mm bearing hub. The wheel arrives ready for your axle, so assembly needs no extra parts.
Tire thickness
Wall thickness can be changed from 500 pcs. A thicker tire lasts longer under rental use; a thinner one trims weight and cost.
Logo
Your logo is moulded into the sidewall with a dedicated mould, paid once by the buyer. Every wheel then carries the brand for the life of the tire.
Planning a private-label beach cart or wheel kit?
Made in the Factory That Builds Our Beach Wheelchairs
The balloon wheels in this project come off the same floor as our CE-certified beach wheelchairs and carry the same 1-year warranty.
Ary Beach, Foshan
- 2015
- factory founded
- 3,000 m²
- production floor
- 50+
- staff
- 1,000+
- beach units a month
- Tires are moulded in our own workshop, so size and colour stay consistent from batch to batch.
- Each wheel passes an air-retention test before assembly, so it arrives holding pressure.
- A final inspection checks hub, valve and bore before packing. Watch the line in our factory videos.
Want to see the wheels before you order?
Three Ways We Pack Balloon Wheels for Export
Balloon wheels are light but bulky, so packing decides your freight bill. Choose the method that fits how you receive goods, or ask our team which one suits your route.
Inflated, woven bag
Wheels ship inflated to 3–4 PSI in woven bags. They go straight onto your assembly line with no pumping.
Best for: factory assembly
Vacuum, woven bag
Deflated wheels are vacuum-packed flat. More pieces fit in each container, so the freight cost per wheel drops.
Best for: container loads
Vacuum, export carton
Deflated pairs sit in a printed carton. The pack survives parcel handling and is ready to sell online.
Best for: e-commerce and retail
Tell us your destination port or warehouse.
Beach Balloon Wheel Questions from Buyers
Short answers to what purchasing teams ask before a first order.
What sizes of beach balloon wheels do you supply?
7.5″, 8″, 9″, 12″ and 16″, in PU or PVC. The full table is on the beach balloon wheel page.
Will the wheel fit my existing axle?
Standard bores run from 8.5 to 30.5 mm, and bushings cover the steps between. Send the axle diameter and usable length and we confirm the fit on a drawing.
How much air do balloon wheels need?
PU wheels work at 3–5 PSI and PVC at 2–4 PSI. Use a hand pump and stop when the tire reaches its stated diameter; over-inflation is not covered by warranty.
Can I order one sample set first?
Yes. A single wheel set ships as a sample, so you can test it on your own frame and sand before placing a bulk order.
How long does a custom order take?
30–45 days after the drawing is confirmed. Standard silver-grey wheels in common bores are usually faster; we state the date in the quotation.
Do you supply complete carts as well as wheels?
Yes. See the folding beach cart project and the beach cargo cart project for finished equipment on the same wheels.
Have a question that is not answered here?
Get Beach Balloon Wheels That Fit Your Equipment
Send the four details below and we reply with a matching wheel, an ex-factory price and the sample lead time.
- Equipment type and a photo or drawing
- Axle diameter and usable axle length
- Wheel size and material you have in mind
- Quantity and destination country
Request a Wheel Quote
Fill in the form and our sales team will answer by email.

