The featured image is illustrative. It does not document a verified customer project, product test or operating procedure. Verify the supplied model and configuration against its instructions.

A useful beach accessibility report shows whether the equipment was ready, whether visitors could use the service, and what prevented a requested visit. Start with equipment availability, equipment use and fulfilled requests. Add the reasons behind downtime and declined requests before deciding to buy more chairs.

The measures below are a proposed reporting method for councils, resorts and operators with a beach mobility fleet. They are not industry benchmarks. Keep model types and service types separate: a land wheelchair, a walking aid and a supervised floating-chair session provide different forms of access.

Count serviceable equipment time, not chairs in storage

An inventory of six chairs does not establish six available places. Some may be awaiting repair, assigned elsewhere or unsuitable for the advertised activity. Give each unit an asset ID and record the hours it was scheduled to be available, then subtract the time it was held for equipment reasons.

Use these definitions consistently over the reporting period:

Measure Calculation What it tells the operator
Equipment availability Equipment-ready chair-hours ÷ scheduled chair-hours × 100 How much of the planned equipment capacity was serviceable
Equipment utilization Visitor-use chair-hours ÷ equipment-ready chair-hours × 100 How much of the serviceable equipment time was used
Service opening rate Actual service-open hours ÷ advertised service hours × 100 Whether visitors could access the advertised service
Request fulfillment Fulfilled eligible requests ÷ eligible requests × 100 How often the service met a request within its stated scope

A chair-hour is one chair available or used for one hour. Two chairs used for half an hour each account for one chair-hour. For utilization, start and stop time at the same points each time—for example, handover to return—and state that choice in the report. This does not measure time actually spent on sand or in water.

Use a dash and explain the reason when a denominator is zero. A day with no advertised service has no service opening percentage; it is not a 100% success. Similarly, no requests means fulfillment is not applicable.

Work through one operating day

Consider a hypothetical land-wheelchair service with three chairs, each scheduled for six hours. One chair is held for two of those hours while a wheel fault is investigated. Across the three units, visitor use totals six chair-hours. The route and staffed service remain open for all six advertised hours.

  • Scheduled capacity: 3 chairs × 6 hours = 18 chair-hours.
  • Equipment-ready capacity: 18 − 2 = 16 chair-hours.
  • Equipment availability: 16 ÷ 18 × 100 = 88.9%.
  • Equipment utilization: 6 ÷ 16 × 100 = 37.5%.
  • Service opening rate: 6 ÷ 6 × 100 = 100%.

These figures describe different things. The service stayed open despite losing some equipment capacity. Low utilization alone does not explain whether three chairs are too many: the six chair-hours of use could have occurred during two busy clock hours with all three chairs occupied. Check the timing of requests before changing fleet size.

For the same hypothetical day, suppose there were eight eligible requests, six fulfilled and two declined because a suitable chair was already in use. Fulfillment would be 75%. That result adds information the daily utilization percentage cannot show. None of these values is an Ary Beach customer result or a recommended target.

Keep request outcomes visible

Define an eligible request before calculating fulfillment. It should be a request within the advertised location, opening time and type of service that can proceed through the service’s suitability process. Keep other inquiries in separate categories rather than deleting them. Repeated requests for an unsupported service may reveal a gap worth investigating.

One visitor may ask by email, call to confirm and then collect the chair. Count that as one service request, not three. Keep cancellations and no-shows separate from requests declined by the operator. If either is excluded from the denominator, show the excluded count beside the percentage.

Useful reasons for an eligible but unfulfilled request include all suitable units occupied, equipment held, route closed and the promised assistance unavailable. Count inquiries outside the advertised activity or equipment scope separately, including requests for a type of unit the service does not offer. These inquiries remain visible but do not enter the eligible-request denominator. Avoid a single “unavailable” category: it cannot tell a buyer whether another chair would solve the problem.

Collect only the information needed to understand the service outcome. A management dashboard can usually use anonymous counts and brief barrier descriptions. It should not expose a visitor’s name, diagnosis or detailed support needs.

Separate equipment faults from closed routes and water sessions

A serviceable floating wheelchair can still be unavailable for a session because the water conditions or trained assistance do not meet the operating plan. Keep that event out of mechanical downtime. Otherwise, equipment performance will appear poor when the constraint was elsewhere.

The AY-ST-V1.0 manual identifies a three-wheel floating chair with inflatable PVC wheels and armrests. A fault affecting an inflatable component needs a different entry from a closed water activity. Record the affected component and the resulting equipment hold; do not reduce both to “chair unavailable.” Manufacturer-listed features identify the unit, not the cause of a particular failure.

Likewise, group the AY-STZ1.0 walking aid separately from seated wheelchairs. Its manufacturer’s manual identifies four wheels and handle brakes. Reporting every mobility aid as a “chair” hides differences in demand, inspections and replacement parts.

For route availability, specify the section being measured. An open mat from the boardwalk to a seating area does not establish an open route to the water. Use the practical beach-access check to define the journey before assigning its status.

Make the maintenance record explain lost capacity

For each equipment hold, retain the asset ID, model, affected part, start time, repair action and release time. If a unit is waiting for a part, distinguish that delay from inspection or workshop time. Count only the overlap with scheduled service hours in the availability calculation; keep total elapsed repair time separately for maintenance planning.

Avoid counting the same hour twice when two faults affect one chair. The unit lost one hour of capacity even if the workshop investigated two components. Preserve both fault descriptions in the repair history, while using the combined hold interval for downtime.

Repeated faults can justify a supplier discussion, but a raw count does not establish a model defect. Compare the configuration, use, care history and exposure before drawing that conclusion. A heavily used chair may produce more service records than an identical reserve unit. The model-manual library is the starting point for matching the maintenance task to the supplied equipment.

Use the report to choose the next practical change

Read the numbers beside short visitor comments. A high fulfillment rate can coexist with awkward transfers, unclear booking instructions or an approach route that users find difficult. Ask what prevented or complicated the visit, then link the issue to the equipment or service step that can be changed.

Different findings call for different responses:

  • Concurrent requests exceed the suitable units available: examine peak-time demand and the cost of additional or reserve equipment.
  • A particular part accounts for repeated long holds: review the part identification, repair method and supply arrangements with the supplier.
  • Equipment is ready but trained assistance is often absent: address service coverage before adding chairs.
  • Visitors ask for water access while only land access is offered: assess that proposed service separately; a floating-chair purchase does not establish a workable water program.

For a new service launch, establish the definitions before opening so later reports remain comparable. For an equipment enquiry, send Ary Beach the model mix, observed capacity gap and relevant component history. That gives the supplier a concrete problem to answer without turning a percentage into an unsupported promise about the next purchase.